Seawater Distiller
Introduction:
​
Many people in the world globally have limited or no access to clean drinking water. The motivation of this report aims to document a senior project to satisfy for the award of MET by CWU. The purpose of the project was to design and manufacture a solar thermal collector capable of heating water using solar energy.
​
​
Design Requirements:
The solar powered for Seawater Distiller must hold to these requirements:​
​
-
Prototype collector to be no more than 24 x 50 inches for going through doorways etc.
-
Be able to absorb and utilize at least 70% of the incoming solar radiation on a day where irradiance is equal to 800 W/m2.
-
The result in the efficiency and heating capacity of the collector to be 95 C
-
Cost no more than $500 to manufacture.
-
The device must be transportable simply for a long distance and it is required no more than 25 lbs. of force to hold up when the device is transport.
-
Weight no more than 100 lbs.
Scope
​
The scope of this project was the solar Collector tube efficiency. The water container, piping, and stand are already in the lab storage cupboard. Kumail Alshagag was doing condensation unit.
​
https://hx7069.wixsite.com/condensation
​
​
​
​